Crown XLS 2502 Lightweight Amplifier

• 775W at 4 Ohm Per Channel
• 440W at 8 Ohms
• Band Pass Filter Per Channel
• Selectable Input Sensitivity
• Security Settings Disables Menu Buttons
• XLR, 1/4", and RCA Inputs
• Integrated PureBand Crossover System
• Efficient Forced-Air Fans
• Remote Power Trigger
• Peakx Limiters Provide Maximum Output
• Remote Power Trigger

19 x 3.5 x 10.7"

Connectors:

Input:
2x XLR
2x RCA
2x 1/4" / 6.35 mm (can be used as a loop-thru to other amplifiers)

Output
Binding Post (Channel 1 & 2): 2 Pairs
4-Pole Speakon: 2 (Channel 1 offers Channel 1 & 2 wiring or Bridge Mode wiring)

Sensitivity: 1.4 Vrms

Amplifier Power: 1200 W at 2 ohm per channel
                         775 W at 4 ohm per channel
                         440 W at 8 ohm per channel
                         2400 W at 4 ohm bridged
                         1550 W at 8 ohm bridged

Frequency Response: At 1 W, 20 to 20,000 Hz: +0 dB, -1 dB

Signal to Noise Ratio: >103 dB (at 0.775 Vrms sensitivity, Signal to Noise is 6 dB lower)

THD: <0.5%

Intermodulation Distortion: <0.3%

Damping Factor: >200

Crosstalk: At 1,000 Hz: >85 dB
                At 20,000 Hz: >55 dB